Services
- Boat seat reupholstery — bench, bucket, leaning post, bolsters, in marine vinyl. Boat seat reupholstery in marine-grade vinyl
- Boat upholstery repair — torn vinyl, split seams, faded panels, mould, foam replacement. Boat upholstery repair
- Custom cushions — cockpit, bow, sunpad, transom, removable covers. Custom boat & yacht cushions
- Helm seats and bolsters Helm seats & marine bolsters
- Yacht salon and cabin upholstery — sofas, berths, dinettes, panels. Yacht Interior Upholstery — Salon & Cabin
- Yacht headliners and wall panels Yacht headliners & wall panels
- Jet ski and PWC seats Jet ski & PWC seat upholstery
- Pontoons, centre consoles and sportfish Pontoon & centre-console upholstery
- Marine materials — what to choose and why. Marine upholstery materials
When the scope includes adjoining finishes, coordinate Yacht Interior Upholstery — Salon & Cabin, Boat seat reupholstery in marine-grade vinyl, Ivory Yacht Upholstery & Cushion Ideas before approving the material and seam layout. This keeps the decisions for individual pieces consistent with the whole interior.
For vessel access and transport planning, see our guidance for Fort Lauderdale boat owners and Miami boat owners. Upholstery projects are coordinated through the Hollywood atelier; arrangements depend on the vessel and the pieces involved.
Materials made for the water
Exposed seating needs materials selected for its actual use: marine vinyl or suitable outdoor fabric, compatible thread, drainage and foam. Check UV, cleaning and mildew-resistance specifications for the selected product. An upholstery label alone does not make the complete cushion waterproof or maintenance-free.
How it works for boats
Send photos of the seating and the vessel type and location. Removable cushions and seat covers can be brought to the atelier in Hollywood. For fixed or built-in pieces, we discuss the practical arrangements with you before anything starts. The atelier is close to the marinas of Fort Lauderdale, Dania Beach, Hollywood, Hallandale and Aventura, and to Miami Beach and the Miami River yards. Upholstery Service Areas — South Florida
Treat a marine cushion as a complete assembly
The cover is only the visible layer of a boat cushion. Foam, backing, seams, zips, drainage paths and fastenings determine how the finished piece fits and how it can dry after use. A material described as water resistant does not make every seam and opening in the assembled cushion waterproof. Match the whole construction to the location and exposure.
Separate shaded cabin pieces from exposed bow seating, helm upholstery and sunpads. Those areas can differ in how often they get wet, whether people stand on them, and how they are stored when the boat is unused. Closed-cell and open-cell foams have different behaviour; neither label alone selects the right thickness, support or construction for every cushion. The choice belongs to the actual application.
Photograph the underside of removable pieces when it is readily accessible. Show zips, mesh, vents, attachment points and the supporting deck or base. Identify any trapped moisture, damaged base or loose fastening before selecting a new cover. If an existing cushion has changed shape, record the space it must fit as well as its current dimensions. The Marine upholstery materials and Custom boat & yacht cushions pages explain the relationship between surface choice, fit and the complete cushion specification.
Map the pieces before they leave the boat
Several similar cushions can have different corners, underside fastenings or clearances. Before removing pieces that are intended to be removable, take an overview of the installed layout and give each piece a simple label. Include its position, front edge and the piece beside it. Keep the same labels in photographs and in the inventory sent to the atelier.
A useful measurement record includes length, width and thickness, but also the conditions around the cushion. Show a curved coaming, a hatch below, a rail above or a lid that has to open. A replacement can look correct on a workbench and still interfere with access if those relationships are overlooked. Existing covers are helpful references; stretched or distorted covers should not be treated as the only source of dimensions.
Fixed panels and built-in seating need a different plan from loose cushions. Explain where the vessel is located and which pieces can be safely accessed, then agree the inspection and transport arrangements before dismantling anything. Do not assume marina work, collection or installation on board is included. For larger sets, group photographs by area: helm, cockpit, bow, flybridge and interior. Planning Yacht Upholstery Renewal: A Checklist provides a broader checklist for organising a yacht upholstery enquiry.
Build cleaning and drying into the material choice
Choose an upholstery material together with its care instructions. A cleaner approved for one coated vinyl can be unsuitable for another fabric or finish. Read the guidance for the exact product instead of assuming that every material sold for marine use accepts the same chemicals. Test any permitted cleaning method on an inconspicuous area first, following the manufacturer’s directions.
Routine care begins with removing loose dirt before it is worked into seams and textures. Where the product instructions allow washing, remove cleaning residue as directed and let the complete piece dry before enclosed storage. A clean-looking face can conceal moisture beneath a cushion or against its base. Check those areas during ordinary care, especially after the boat has been closed for a while.
UV resistance and mildew resistance are material characteristics, not a promise of unlimited outdoor life or maintenance-free use. Exposure, covers, drainage, ventilation and the condition of the underlying assembly still matter. Tell the atelier how the boat is normally stored and cleaned so the proposed construction fits that routine. For manufacturer guidance, see Sunbrella marine upholstery care. The local planning guide Boat upholstery: sun, moisture and care connects care questions with repair and renewal decisions.
Choose between a coated surface and a woven fabric
A wipeable coated surface and a woven upholstery fabric offer different tactile and maintenance experiences. Start with the application: exposed seating, a sheltered cockpit, a cabin sofa or a removable decorative cushion. Then compare the exact product specifications for that use. A familiar brand name does not make every product in its range suitable for the same place.
Ask about the face material, backing, compatible cleaning method and intended construction. For a woven fabric, texture and the direction of the weave affect the appearance of adjoining panels. For a coated vinyl, grain, gloss and seam placement can be equally prominent. Neither choice should be made from a colour swatch without considering how the assembled cushion will be used and stored.
If a particular brand such as Sunbrella interests you, identify the product family and confirm availability for the project rather than assuming that the name specifies a stocked material. Compare a usable sample with the retained upholstery. The Marine upholstery materials page introduces the complete material system, and Marine fabric or vinyl for boat cushions? helps frame the fabric-versus-vinyl discussion without treating either as the answer for every boat.
